Bookshelf (freestanding)
panelFreestanding bookshelf in birch plywood: two full-height sides with a top and bottom set between them and a fixed number of fixed shelves. An optional thin back panel (nailed to the rear) stiffens the case, and an optional plinth/kick board lifts it off the floor. Side grain runs vertically; the top, bottom and shelf grain runs along their length. Visible front edges are banded.
Parameters
Values update the parts list live.
Project units
min 300 max 1200
min 400 max 2400
min 150 max 500
min 12 max 25
min 3 max 12
min 40 max 200
Saw
Pick a tool for the kerf, or enter it directly.
Kerf: 3 mm
Stock
Default sheets for the EU standard.
2800 mm×2070 mm
2440 mm×1220 mm
2500 mm×1220 mm
Parts (9)
Derived: internal_w=764 mm · shelf_depth=294 mm
| Part | Qty | Length | Width | Match / fit |
|---|---|---|---|---|
| Side Full-height, vertical grain, banded front edge | 2 | 1800 mm | 300 mm | |
| Top | 1 | 764 mm | 294 mm | |
| Bottom | 1 | 764 mm | 294 mm | |
| Shelf Grain along shelf length | 3 | 764 mm | 294 mm | |
| Back Nailed to the rear, full overlay | 1 | 800 mm | 1800 mm | |
| Plinth Front kick board | 1 | 764 mm | 80 mm |