Base cabinet (frameless 32 mm system)
panelFrameless (European 32 mm) base cabinet carcass: two full-height gable sides, a bottom set between them, front and back top stretchers, a thin back panel (either housed in a rabbet/groove or nailed to the rear), optional adjustable shelves, an optional recessed toe-kick board and 0-2 overlay doors. Carcass is wood-decor melamine chipboard; the back is 3 mm HDF. Side and door grain runs vertically. All visible front edges are edge-banded.
1 forks
Parameters
Values update the parts list live.
Variant
Project units
600 mm
min 150 max 1200
820 mm
min 500 max 1000
560 mm
min 300 max 700
18 mm
min 12 max 25
min 3 max 18
min 5 max 20
min 60 max 200
min 1 max 6
Saw
Pick a tool for the kerf, or enter it directly.
Kerf: 3 mm
Stock
Default sheets for the EU standard.
2800 mm×2070 mm
2440 mm×1220 mm
2500 mm×1220 mm
Parts (9)
Derived: toe_h=100 mm · carcass_h=720 mm · side_depth=560 mm · internal_w=564 mm · back_w=584 mm · back_h=740 mm
| Part | Qty | Length | Width | Match / fit |
|---|---|---|---|---|
| Side Full-height gable, vertical grain, banded front edge | 2 | 820 mm | 560 mm | rip: carcass-depth |
| Bottom | 1 | 564 mm | 560 mm | rip: carcass-depth |
| Top stretcher Front and back stretchers, ~100 mm wide | 2 | 564 mm | 100 mm | |
| Back | 1 | 584 mm | 740 mm | cut to fit |
| Shelf 1 mm pin clearance each side, references side depth minus 20 mm setback | 1 | 562 mm | 540 mm | rip: shelf-depth |
| Toe kick Recessed ~50 mm behind door face | 1 | 564 mm | 100 mm | |
| Door Overlay door, vertical grain, all edges banded; width split between doors | 1 | 714 mm | 594 mm |